Minimalist Bicycle Rack, Wall Mounted Hanger (Standard)
Starting Bulk Discount 2% for 2 Orders
Made From Solid Hardwood this minimalist Bike Rack is stronger and more stable than many other designs out on the market today. Featuring sleek Curves and 4 anchoring points (Most other designs only have 2 point anchors) milled perfectly each and every time. Not only is the connection to your wall stronger, it's also an invisible wall connection, The Keyholes cut into the base plate allow for a completely flush, solid mount against any wall, as well as, no visible anchors after it's properly mounted to the wall!
When choosing a mounting position for your bike, you have an enormous amount of options with this design. The perfectly sized cradle will fit under almost any resting position, giving you the most flexibility out of any design currently available.
Your Bike will be cradled comfortably 11.75 inches (29.9 cm) from the wall. This distance Gives enough distance to comfortably fit any bike, while also maintaining a strong connection to the wall. The cradle opening is a large 3.8 inches (9.7 cm) wide and 1.8 inches (4.6 cm) deep. The Bike Rack material is Approx 0.9 inches (2.3 cm) thick
Included in the Box
Included in the box:
(1) Fully assembled Bike Rack
(1) Mounting Template
(4) Mounting Screws
Return policy
I gladly accept returns, exchanges, and cancellations
Contact me within: 14 days of delivery
Ship items back within: 30 days of delivery
Request a cancellation within: 1 hour of purchase
The following items can't be returned or exchanged
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
- Custom or personalized orders
- Perishable products (like food or flowers)
- Digital downloads
- Intimate items (for health/hygiene reasons)
Conditions of return
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
Questions about your order?
Please contact me if you have any problems with your order.
Installation Instructions
For the Best Results Always Attatch to a structual Stud (wood) or Concrete wall.
- Mark a level horizontal line 4 inches wide (with pencile) at the hight that you would like your bike rack to be mounted.
- Place the Template on the wall and align the line marke "B" with the line on the wall.
- Holding the template in place, mark the (4) screw hole position onto the wall.
- After Marking the (4) hole positions, remove the template.
- Make a small pilot hole with a 1/8 inch drill bit at each of the 4 hole positions.
- Screw in the (4) screws, Leaving just enough room (about 0.03-0.07 inch (1-2 mm)) to snugly slip the screws into the keyholes in the base of the bike rack. Make sure not to over tighten the screws into the wall as this can strip out the material around the screw and greatly reduces the holding power of each screw.
- Once screws are secury in place with just enough room to snugly slide (it shouldn't take an extraordenary amount of force) the bike rack into place. Align the 4 screws with the hols on the back of the rack and slide into place. This should be a 0.75 inch drop. If the rack is to lose or to tight (you can get it to slide on) you will need to adjust the screws slightly untill you are able to snugly and securly slide the bike rack into place.
Concrete walls: you will need a hammer drill and concrete bit to make the proper holes nessisary.
Drywall only: Not advised but if you need to attach to just drywall you need to take extra care to not over tighten. If you attatch snugly without over tightening you will be god for up to 60 lbs of static force (ie. you can't drop 60 lbs onto it, you can only place 60 lbs onto it).
